DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 3 L
  • 10 L

WALLSEAL

Header

acrylic elastomeric paint & sealer for vertical surfaces

Special acrylic elastomeric coating and sealer based on dedicated state-of-the-art 100% acrylic UV-cross linking resins. Ideal for sealing exterior walls against humidity. Covers hairline and minor cracks perfectly. Good ability to expand and contract with the substrate. Apply on any type of new or old substrate, such as plaster, concrete or putty. Creates a waterproof and elastic membrane, extremely resistant to rain, snow, harsh sun, sudden temperature variations, humidity, mould and chemical pollution. Ideal for the protection of buildings in urban or mountainous areas where adverse weather conditions prevail. Provides a smooth finish. Non-yellowing colours over time.

  • extremely resistant to adverse weather conditions
  • extreme elasticity and coverage
  • waterproofs hairline minor cracks
1
BUILDINGS – EXTERIOR USE
matt
Finish
toolsall
TOOLS
WALLSEAL
THINNING
1-2 hr
DRYING TIME
2-4 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
13 sin plin 2
m2/L
SPREADING RATES

Preparation

Carefully prepare surface to obtain good results. Surface must be clean, dry and free from defective or non-cohesive material, dust, oils and salts.

New porous plaster, concrete, brick, cement:
Prime with FERM (H2O) thinned up to 80% with water. Apply 2 coats of WALLSEAL.


Sound previously painted substrates:
Apply 2 coats of WALLSEAL.

Use

Roller, brush or spray airless. Thin by 5-15% with water.

► Stir well before and during application.
► Allow newly poured concrete to cure for 30 days, then prime with FERM (H2O).
► For best results, surfaces should not be exposed to direct sunlight during paint application.

 

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 1-2 hours.

Recoat: 2-4 hours.

Practical coverage: 9-13m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for